Vivolink PRODVICW20 DVI-kabel 20 m DVI-D sort

The Vivolink PRODVICW20 is a 20 m DVI-D cable designed for reliable digital video transmission between DVI-D devices. It supports resolutions up to Full HD 1080p and is built with a pure copper conductor and high-quality DVI connectors with gold plating for stable signal transfer over longer distances. The cable has triple shielding plus extra shielding in the connector and a flexible jacket that allows a small bending radius.

Advantages

Triple shielding and additional connector shielding reduce interference and help preserve signal integrity. A pure copper conductor and gold-plated DVI contacts provide consistent conductivity and corrosion resistance. The cable’s flexibility and durable 9.5 mm diameter construction support easy routing and long-term use without compromising performance.

Suitable for

• Connecting monitors and displays to DVI-D outputs
• Long-distance digital video runs up to 20 m without active extenders
• Use in office, studio, or conference-room AV setups

Key specifications

• Length: 20 m
• Connector 1: DVI-D
• Connector 2: DVI-D
• Supported resolution: up to Full HD 1080p
• Conductor: pure copper
• Shielding: triple shielded cable + extra shielding in connector
• Connector plating: gold (min. 15 µm as specified by manufacturer)
• Diameter: 9.5 mm
• Weight: 1.98 kg
• Colour: Black
• RoHS compliant

How to use

Connect one DVI-D connector to the video source (PC, media player, or graphics card) and the other DVI-D connector to the display or projector. Ensure both devices are powered off when connecting to avoid hot-plug issues, then power them on and select the correct input on the display. Route the cable avoiding sharp edges and excessive pulling; use cable clips or ties if needed to secure the run.

Recommendations

For best results over the full 20 m length, keep the cable away from strong electromagnetic interference sources (large power supplies, unshielded power cables). If you encounter signal degradation at higher resolutions, verify connector seating and try a shorter run or an active signal extender.