Konto Kontakt
Din kurv
Black Weekop til −30 %endnu 8 d 00:49:07
DPD & FedEx – leveringsdato på produktsiden.
Brug for hjælp? DistriNode AI hjælper dig.

XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s

XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
-11%
Black Week
60 md.gratis
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
878,50 kr.
986,21 kr.−11 %
PDF
PDF
Lagerstatus 10 Produktkode 1465000 Model 3AL82055AA-BO Garanti 5 år

Levering & returnering

Forventet levering mandag den 7. december
Du holdes opdateret via vores detaljerede sporingssystem
Betalingsmuligheder
BetalingskortVisaMastercardApple PayGoogle PayBankoverførsel

Stil et spørgsmål – AI-assistenten svarer med det samme.

Beskrivelse

The BlueOptics 3AL82055AA-BO is an XFP fiber optic transceiver module engineered for 10 Gbps network links. Designed for use in fiber-based network infrastructure, this compact silver module provides a standardized XFP interface and supports a maximum data transfer rate of 10000 Mbit/s. With a lightweight construction (approximately 20 g) and an MTBF rating of 1,000,000 hours, it meets common compliance standards including CE, FCC and RoHS for reliable optical connectivity in switches, routers and optical line systems.

Advantages

The module offers a standardized XFP interface that ensures compatibility with a wide range of networking equipment that accepts hot-pluggable optical modules. Its 10 Gbit/s capacity provides sufficient bandwidth for high-throughput links and data center uplinks. The silver housing and compact form factor reduce weight and space usage in chassis-based systems, while the long MTBF figure indicates a design focused on operational longevity and reduced maintenance intervals. Compliance with CE, FCC and RoHS demonstrates conformance to regulatory and environmental requirements.

Suitable for

  • 10 Gbps fiber uplinks between switches and routers
  • Data center interconnects and aggregation links
  • Metro and enterprise optical networks requiring XFP modules
  • Optical equipment maintenance and spares for compatible systems

Key specifications

  • Interface type: XFP
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbps)
  • Module color: Silver
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours
  • Compliance: CE, FCC, RoHS

How to use

Install the BlueOptics XFP transceiver into an appropriate XFP port on compatible network equipment while following standard ESD precautions. Ensure the optical connectors and fibers are clean and correctly matched (single-mode or multimode as required by system design). After insertion, confirm that the host device recognizes the module and that link status indicators show an active connection. Perform any necessary link configuration on the switch or router to enable the 10 Gbit/s interface.

Recommendations

To maintain reliable performance, handle the transceiver by its housing, avoid touching the optical interfaces, and keep dust caps on when not in use. Verify compatibility with the host device's supported XFP modules and confirm fiber type and connector standards before deployment. Regularly inspect and clean fiber connectors to prevent signal degradation.

Vigtigste egenskaber
  • 10 Gbps fiber uplinks between switches and routers
  • Data center interconnects and aggregation links
  • Metro and enterprise optical networks requiring XFP modules
  • Optical equipment maintenance and spares for compatible systems
  • Interface type: XFP
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbps)
  • Module color: Silver
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours
  • Compliance: CE, FCC, RoHS

Specifikationer

Specifikationer
Digital diagnosticovervågning (DDM)
Ja
Duplexsystem
Fuld
Ethernet LAN
Ja
Ethernet-interfacetype
10 Gigabit Ethernet
Fiber-Ethernet-kabelteknologi
10GBASE
Fiberoptisk stik
LC
Formfaktor
XFP
Gennemsnitlig tid mellem fejl (MTBF)
1000000 h
Hot-plug-understøttelse
Ja
Hot-swap
Ja
Interfacetype
XFP
Maks. driftstemperatur
70 °C
Maks. overførselsafstand
10000 m
Maksimal dataoverførselshastighed
10000 Mbit/s
Min. driftstemperatur
0 °C
Mærkekompatibilitet
Alcatel
Nemt at installere
Ja
Overensstemmelsescertifikater
RoHS, Federal Communications Commission (FCC), CE
Overholdelse af bæredygtighedskrav
Ja
Produktfarve
Sølv
Rx-bølgelængde (maks.)
1310 nm
SFP-transceiverstandard
LR
SFP-transceivertype
Fiberoptisk
Singlemode-fiber (SMF) understøttet
Ja
Tx-bølgelængde (maks.)
1310 nm
Vægt
0.02 kg

Brochure

Åbn Brochure

Dokument

Åbn Dokument

Dokument

Åbn Dokument
Prishistorik for de seneste 6 måneder
XFP-transceivermodul BlueOptics 3AL82055AA-BO 10000 Mbit/s
Aktuel
878,50 kr.
Laveste 7 d.
878,50 kr.
Højeste 7 d.
929,82 kr.
Ændring 24 timer
-51,33 kr.   -6%
Ændring 7 d.
-42,05 kr.   -5%
Ændring 30 d.
-107,71 kr.   -11%

Skriv en anmeldelse

Bedømmelse *
Bemærk: HTML-kode understøttes ikke!

Flere BLUEOPTICS-produkter i denne kategori

12

Populære produkter i denne kategori

8
Sælger: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litauen · Virksomhedsnr. 303192950 · Momsnr. LT100008198612 · Afsendes fra EU (Litauen)
WhatsApp
Messenger
Hej, jeg er DistriNodes AI-assistent. Jeg hjælper dig gerne med at finde produkter, sammenligne muligheder, lave PDF-tilbud eller oprette supporthenvendelser.
Alle kategorier