LINDY USB-C Dante ind/ud-konverter 2x2 lydinterface 70617

Integrating analogue audio equipment into a Dante network often requires bulky interfaces or costly mixers. The LINDY USB-C Dante In/Out Converter solves this by providing a compact, bus-powered bridge that turns any USB-C equipped computer into a 2-in/2-out Dante endpoint, enabling seamless audio routing over standard Ethernet.

Who is it for

Audio professionals, system integrators, and live sound engineers who need to connect a laptop or PC to a Dante audio network without additional drivers or external power. Ideal for recording, playback, and monitoring in installed sound, broadcast, and studio environments.

Main features

• 2 input and 2 output audio channels over Dante
• USB 2.0 Type-C connection, driverless for Windows, macOS, and Linux
• 100BASE-TX Ethernet port for Dante network integration
• Supports sample rates up to 96 kHz and 24-bit depth
• Aluminium housing with LED indicators for power, Dante sync, and USB audio
• Powered directly from the USB port – no external PSU needed

Specifications

• Audio channels: 2 in / 2 out
• Dante version: 4.2.x
• Network interface: 100BASE-TX Ethernet (RJ45)
• Supported sample rates: 44.1, 48, 88.2, 96 kHz
• Bit depth: 16-bit, 24-bit
• Frequency response: 20 Hz – 20 kHz
• Dynamic range: >90 dB
• Signal-to-noise ratio: >90 dB
• THD+N: <0.01%
• Power consumption: <1 W
• Compliance: CE, FCC, RoHS, REACH

Tips

Use Dante Controller software to route audio between this converter and other Dante devices on the network. For lowest latency, select a suitable latency setting in Dante Controller based on your network size and switch configuration.