Einhell GE-SP 18 Li Solo Akku-klarvandspumpe, dyk- / trykpumpe (4181500)

The Einhell GE-SP 18 Li - Solo is a battery-powered water pump designed for garden and outdoor use. It provides a maximum pressure of 0.8 bar and a flow rate up to 5000 l/h, with a delivery height of up to 8 meters. The unit is compact and lightweight at 2.37 kg and is finished in black and red. As a Solo model, the pump is supplied without battery and charger, allowing integration into existing Einhell 18 V cordless tool systems.

Advantages

The GE-SP 18 Li - Solo offers cordless operation for flexibility around the garden and outdoor areas, removing the need for a nearby mains connection. Its 5000 l/h flow rate and 8 m delivery height support a range of water transfer tasks while the 0.8 bar maximum pressure ensures steady output for hoses and sprinklers. At 2.37 kg the pump is easy to carry and reposition, and the compact housing simplifies storage.

Suitable for

• Transferring water from rain barrels or ponds to irrigation systems
• Filling or emptying garden water containers and tanks
• Operating sprinklers and low-pressure hose irrigation
• Temporary water transfer tasks where cordless operation is required

Key specifications

• Maximum pressure: 0.8 bar
• Maximum flow rate: 5000 l/h
• Maximum delivery height: 8 m
• Weight: 2.37 kg
• Product colour: Black, Red
• Power source: 18 V battery (battery and charger not included)

How to use

Attach a suitable hose to the pump's outlet and place the suction side in the water source. Install a compatible 18 V Einhell battery in the tool connection and switch the unit on. Monitor flow performance and positioning while pumping; stop the pump if air enters the suction line or if the pump runs dry. After use, remove the battery, drain remaining water from the pump, and store the unit in a dry place.

Recommendations

For reliable operation, use batteries with sufficient charge from the Einhell 18 V range and ensure hoses and connectors are rated for the pump's flow. Avoid pumping liquids with large solids or aggressive chemicals. Regularly inspect seals and connections for wear and flush the pump with clean water after use to extend service life.